Difference between revisions of "EasyCode Mobile Application"

From PTI Security Systems
Jump to: navigation, search
Line 83: Line 83:
 
<div style="float: right;">[[#HDAUlinkhide|Hide]]</div>
 
<div style="float: right;">[[#HDAUlinkhide|Hide]]</div>
 
<br \>
 
<br \>
after a tenant has downloaded and installed the EasyCode app, the will need to complete the sign up procedure.  Note that the screenshots are from the Android version of the app.  The iOS version may look a little different, but is functionally the same.
+
After a tenant has downloaded and installed the EasyCode app, they will need to complete the sign up procedure.  Note that the screenshots are from the Android version of the app.  The iOS version may look a little different, but is functionally the same.
  
*Select the <b>Enroll</b> button.
+
*From the startup splash screen, select the <b>Enroll</b> button.
 
*Enter the ten character Site Key for the facility, then press <b>Next</b>.
 
*Enter the ten character Site Key for the facility, then press <b>Next</b>.
 
[[File:EasycodeSignUp1.PNG|353x461px|‎]]
 
[[File:EasycodeSignUp1.PNG|353x461px|‎]]

Revision as of 13:52, 10 July 2019


‎


This page has details on how to Install and set up the EasyCodeA mobile application for tenants which allows them to use their phone or tablet for access in to or out of a facility. Also shows the tenant activity and alarms associated with their unit(s). Requires StorLogix 5.0 or above. application, and Frequently Asked Questions.


EasyCodeA mobile application for tenants which allows them to use their phone or tablet for access in to or out of a facility. Also shows the tenant activity and alarms associated with their unit(s). Requires StorLogix 5.0 or above. is the application used by tenants to gain access to the storage facility. (if you are looking for help with StorLogix MobileA mobile application for managers and owners, that allows limited management of multiple sites through the app. Activity for tenants can be viewed, and access allowed through gates or doors. Requires StorLogix 4.1 or above., our app for managers, click here)


EasyCodeA mobile application for tenants which allows them to use their phone or tablet for access in to or out of a facility. Also shows the tenant activity and alarms associated with their unit(s). Requires StorLogix 5.0 or above. is available through both the Google Play store (Required version Android 5.0 Lollipop or above) and the Apple App Store (Required version iOS 8 or above).



To set up EasyCodeA mobile application for tenants which allows them to use their phone or tablet for access in to or out of a facility. Also shows the tenant activity and alarms associated with their unit(s). Requires StorLogix 5.0 or above. in StorLogix, you will need to do the following:

  • Purchase a Registration Key for StorLogix that has EasyCodeA mobile application for tenants which allows them to use their phone or tablet for access in to or out of a facility. Also shows the tenant activity and alarms associated with their unit(s). Requires StorLogix 5.0 or above. enabled. Before EasyCodeA mobile application for tenants which allows them to use their phone or tablet for access in to or out of a facility. Also shows the tenant activity and alarms associated with their unit(s). Requires StorLogix 5.0 or above. will work, your StorLogix installation will need to have a Registration key (Which looks something like SL-ABCDE-HIJKL-MNOPQ-RSTUV-12345) that has the EasyCodeA mobile application for tenants which allows them to use their phone or tablet for access in to or out of a facility. Also shows the tenant activity and alarms associated with their unit(s). Requires StorLogix 5.0 or above. functions enabled entered into the software. To see if your installation of StorLogix has EasyCodeA mobile application for tenants which allows them to use their phone or tablet for access in to or out of a facility. Also shows the tenant activity and alarms associated with their unit(s). Requires StorLogix 5.0 or above. enabled, click on the "Help" menu and then on "About StorLogix". The information window will display a list of features, including EasyCodeA mobile application for tenants which allows them to use their phone or tablet for access in to or out of a facility. Also shows the tenant activity and alarms associated with their unit(s). Requires StorLogix 5.0 or above. if it is enabled.
  • Get your EasyCodeA mobile application for tenants which allows them to use their phone or tablet for access in to or out of a facility. Also shows the tenant activity and alarms associated with their unit(s). Requires StorLogix 5.0 or above. Site Key. Each site that uses EasyCodeA mobile application for tenants which allows them to use their phone or tablet for access in to or out of a facility. Also shows the tenant activity and alarms associated with their unit(s). Requires StorLogix 5.0 or above. has a unique 10 character Site Key (Which looks something like aBcD1234ef). This key will be provided to you when you purchase the Registration key.
    • Select the EasyCodeA mobile application for tenants which allows them to use their phone or tablet for access in to or out of a facility. Also shows the tenant activity and alarms associated with their unit(s). Requires StorLogix 5.0 or above. menu.
    • Select Register EasyCodeA mobile application for tenants which allows them to use their phone or tablet for access in to or out of a facility. Also shows the tenant activity and alarms associated with their unit(s). Requires StorLogix 5.0 or above. Site Key and type in the key provided.
    • Click Save.

‎

  • Select the keypads or card readers that will work with EasyCodeA mobile application for tenants which allows them to use their phone or tablet for access in to or out of a facility. Also shows the tenant activity and alarms associated with their unit(s). Requires StorLogix 5.0 or above.. Each keypad or card reader that you want to use with EasyCodeA mobile application for tenants which allows them to use their phone or tablet for access in to or out of a facility. Also shows the tenant activity and alarms associated with their unit(s). Requires StorLogix 5.0 or above. must be enabled for that purpose.
    • Select the Setup menu, then AI DeviceAccess Interface Device. A general name referring to all PTI Keypads, Multiplexers, Relay Boards, and Wiegand Protocol Devices. In previous PTI systems these were occasionally referred to as remotes or remote devices. Properties.
    • Select the device and then click Edit.
    • Click on Advanced.
    • Click Next until you get to step 4.
    • Make sure Allow use with EasyCodeA mobile application for tenants which allows them to use their phone or tablet for access in to or out of a facility. Also shows the tenant activity and alarms associated with their unit(s). Requires StorLogix 5.0 or above. is checked.
    • Click Next until you reach step 6, then click Done and accept the change.


‎



EasyCodeA mobile application for tenants which allows them to use their phone or tablet for access in to or out of a facility. Also shows the tenant activity and alarms associated with their unit(s). Requires StorLogix 5.0 or above. needs the following permissions:

  • Location Tracking - Always. The app uses the GPS location of the device to determine if the user is within the minimum distance of the site to be able to activate the access devices. In addition, some sites use Bluetooth low energy beacons to trigger access devices, and the phone needs to scan for these even when the app is running in the background. We do not keep any record of your device location or transmit this location to any third party.
  • Dialer. The application has a shortcut to dial the designated number for the storage facility. To be able to do this, the app must have permission to use the phone dialer and it is used strictly for this purpose only.
  • Microphone. The app has the ability to activate devices using voice commands. To do this, we need permission to use the microphone. All voice recognition processing is done on the phone, and no voice data is transmitted to us or any third party. No recordings are made. Only the command phrases for opening the gates or doors are scanned, and all other words are ignored. If you wish, you can turn off the microphone permissions and the app will continue to work without this feature.


When a tenant is moved in, they need to have EasyCodeA mobile application for tenants which allows them to use their phone or tablet for access in to or out of a facility. Also shows the tenant activity and alarms associated with their unit(s). Requires StorLogix 5.0 or above. enabled before they can use it.:

  • If a user is moved in manually. You will need to check the Authorized to use EasyCodeA mobile application for tenants which allows them to use their phone or tablet for access in to or out of a facility. Also shows the tenant activity and alarms associated with their unit(s). Requires StorLogix 5.0 or above. box during the move in process. This is located in Step 3. An example is shown below:

‎

  • If the user is moved in through the management interface. The user should automatically have the EasyCodeA mobile application for tenants which allows them to use their phone or tablet for access in to or out of a facility. Also shows the tenant activity and alarms associated with their unit(s). Requires StorLogix 5.0 or above. selection enabled when they are moved in via the management interface.


After a tenant has downloaded and installed the EasyCodeA mobile application for tenants which allows them to use their phone or tablet for access in to or out of a facility. Also shows the tenant activity and alarms associated with their unit(s). Requires StorLogix 5.0 or above. app, they will need to complete the sign up procedure. Note that the screenshots are from the Android version of the app. The iOS version may look a little different, but is functionally the same.

  • From the startup splash screen, select the Enroll button.
  • Enter the ten character Site Key for the facility, then press Next.

‎

If the site key is verified as being a correct key, the app will continue to the next screen. Otherwise you will see an error message.


  • Enter the access code the tenant uses to access the site, and their last name, then press Next.

‎

If the access code matches the last name, the app will continue to the next screen. Otherwise you will see an error message.


  • Enter their email address and phone number (make sure the region code is set correctly for users outside of the USA!), then press Next.

‎


  • Decide on a password the tenant will use to log into the app. This password must contain at least 8 characters and have a minimum of 1 special symbol. Enter the password in both fields, then press Next.

‎


  • Select if you wish to be notified of events (Your code is used at a keypad, or an alarm is triggered at your storage unit). Note: Alarm notifications only work at facilities that are equipped with individual unit door alarms.

‎


  • You should see a screen showing that the enrollment was successful.

‎

A text message will be sent to the phone # that was entered, and an email to the designated address. Use either one of these to complete the enrollment process by clicking on the enclosed link. This will verify the signup. Once this is done, the user can then log into the application.