Gate Operators Main Page
PTI Security Systems hardware can work will just about any gate, overhead door or pedestrian door you'd want to use on a facility.
Slide Gate Operators
The vast majority of sites use a slide gate to control access into and out of a facility. The operator uses a chain, belt or hydraulic pump connected to pinch rollers, to pull the gate open and closed. Limit devices connected to the operator sense when to stop the gate in the open or closed position.
Advantages of having a slide gate are:
- Security. Since the gate is a solid barrier, this helps prevent unauthorized access onto the property.
- Conveniance. The gate may have signage that advertises the facility, explains operation of the access system, access hours and safety warnings.
- Cost. Slide gates generally cost less than some other types of gates.
- Size. Slide gates can close off a larger opening than any other gate type. Most all others are restricted to a maximum of 20 feet for a single operator. A chain driven slide gate can generally close off an opening of 35 to 40 feet, and a hydraulic/track operator has an essentially unlimited opening width.
Disadvantages of a slide gate are:
- Space. That large gate has to have somewhere to retract into while it is opening.
- Speed. Because of safety regulations, slide gates are restricted to a max opening speed of 1 foot per second. That can take a long time when you have a large opening.
To troubleshoot hardware problems with your slide gate operator, click Here
Barrier Arm Gate Operators
These gates are also common, and are usually used together with a manual or motorized slide gate. This operator uses a motor connected to lightweight (wood, fiberglass, etc.) arm that can be up to 20 feet long. The arm raises up into the air to allow vehicle passage, and automatically closes once the vehicle has passed through.
Advantages of barrier arm gates are:
- Speed. This operator reacts the quickest to commands, typically only taking 2 to 3 seconds to open or close. This can be especially useful in a situation where the entrance has a limited amount of space for vehicles to line up to get into the facility (For example, just off of a busy street).
- Cost. These operators have the lowest cost of the major types.
- Maintenance. These operators generally require less maintenance than other types.
- Space. The operator has a very small footprint and requires no horizontal space to retract into.
Disadvantages of the barrier arm operator are:
- Security. Since the barrier is only a small arm, the path into the facility is not secure and the operator only provides traffic control. this is why the operator is usually backed up by a slide gate that will close after hours.
- Vulnerability. Since the arm is made of a lightweight material, it can be susceptible to damage from vehicles. (However, it can be replaced at a lower cost than a metal gate could be in the same situation.)