Difference between revisions of "Matrix Daughterboards"
m (Rtoy moved page Matrix Daughterboard to Matrix Daughterboards without leaving a redirect) |
m |
||
| Line 15: | Line 15: | ||
== Notes about the Matrix Daughterboard == | == Notes about the Matrix Daughterboard == | ||
| − | When these daughterboards are used in a [[Digitech Multiplexers|Unimux]], it is always provided with 4 of them installed plus one [[Relay | + | When these daughterboards are used in a [[Digitech Multiplexers|Unimux]], it is always provided with 4 of them installed plus one [[Relay Daughterboards|relay daughterboard]]. All 4 of the installed matrix daughterboards must have the same firmware version. |
Latest revision as of 08:10, 13 August 2015
A member of the DigiWin - Syscon system.
Used inside of a Unimux. There are 4 configuration types for this daughterboardModules that are installed in a Digitech Unimux. There are 3 different types of daughterboards, each with a different function., determined by the version of the firmware on it's socketed chip:
1: Connection to alarm inputs, through a Matrix Wire Trunk alarm network. This is only used when replacing an existing Digitech Matrix Door Alarm Board
2: Connection of Digitech Standard Keypads using a code* format for codes entered at the keypads.
3: Connection of Digitech Standard Keypads using a code# format for codes entered at the keypads.
4: Connection of Digitech Standard Keypads using a *code# format for codes entered at the keypads.
Notes about the Matrix DaughterboardModules that are installed in a Digitech Unimux. There are 3 different types of daughterboards, each with a different function.
When these daughterboards are used in a Unimux, it is always provided with 4 of them installed plus one relay daughterboard. All 4 of the installed matrix daughterboards must have the same firmware version.
